Water Bath Vaporizers with
Venturi Mixer Modules

FEATURES
 

Standard output pressures of 5 to 10 psig do not require compressed air - by adding compressed air, high pressures systems up to 50 psig are available. Designed to supply Propane-Air Mixtures compatible with Natural Gas requirements of 14MM BTU to over 250MM BTU per hour. Vaporizing and Mixing units are skid mounted. Meet industry specifications outlined in ASME Boiler & Pressure Vessel Code, Section I, Division I, and NFPA #58.  Factory Mutual (FM) approved.  Controls are mounted in weatherproof cabinet. High and Low Gas Mix Pressure Safety Switches. High Water Temperature Safety Switch. Low Propane Pressure Safety Switch. Low Water Level Safety Switch. Utilize a water and antifreeze solution as heat exchange medium. Water Circulating Pump to provide even heat distribution in the water/antifreeze solution. Units are factory tested, primed, painted and ready for installation and connection to vaporized LPG supply.

OPTIONS

ASME "U" Stamp (if required).. National Board Registration. High Pressure System - 10 to 50 psig (requires compressed air). Enlarged vaporizer control room or separate mixer and control room building.

SPECIFICATIONS

MODEL	Max. Capacity in BTU per hour	Vaporizer Capacity  in GPH
WB -200 / HVS -14 MM	14 million	200
WB -250 / HVS -20 MM	20 million	250
WB -350 / HVS -30 MM	30 million	350
WB -450 / HVS -40 MM	40 million	450
WB -750 / HVS -60 MM	60 million	750
WB -850 / HVS -70 MM	70 million	850
WB -1000 / HVS -90 MM	90 million	1000
WB -1200 / HVS -100 MM	100 million	1200
WB -1500 / HVS -110 MM	110 million	1500
WB -1500 / HVS -120 MM	120 million	1500
WB -1800 / HVS -130 MM	130 million	1800
WB -1800 / HVS -140 MM	140 million	1800
WB -1800 / HVS -150 MM	150 million	1800
WB -2000 / HVS -180 MM	180 million	2000
WB -2200 / HVS -200 MM	200 million	2200
WB -2500 / HVS -230 MM	230 million	2500
WB -3000 / HVS -250 MM	250 million	3000