Direct Fired Vaporizers with
Venturi Mixer Modules

FEATURES
  • Standard output pressures of 5 to 9 PSIG do not require compressed air -by adding compressed air, high pressures systems up to 50 PSIG are available. 
  • Designed to supply LPG-Air Mixtures compatible with Natural Gas loads of 7MM BTU to 40MM BTU per hour. 
  • Vaporizing and Mixing units are skid mounted. 
  • Meet industry specifications outlined in ASME Boiler &Pressure Vessel Code, Section I, Division I, and NFPA #58. 
  • Factory Mutual (FM) approved. 
  • Controls are mounted in weatherproof cabinet. 
  • Units are factory tested, primed, painted and ready for installation and connection to liquid propane supply

STANDARD ACCESSORIES
 
  • Thermocouple to shut the system down on loss of pilot flame.
  • Mixed Gas Receiver with safety relief valveand high and low mixed gas pressure safety switches.
  • Two stage burner regulator for stable burner pressure.  
  • State-of-the-art piezo igniter on all models. 
  • Stainless steel float rated @ 600 PSIG. 
  • Brass liquid inlet valve. 
  • Dual liquid level control.

OPTIONS
  • Electric automatic ignition - AC 110 Volt.
  • ASME "S" Stamp (Vaporizer).
  • National Board Registration.
  • Liquid Inlet Strainer. 
  • Liquid Inlet Hand Valve.
  • Outlet Pressure Regulator.

SPECIFICATIONS
MODEL
Max. Capacity
in BTU per hour
Vaporizer Capacity 
in GPH
AE -80 / HVS -7 MM 7 million
80
AE -120 / HVS -10 MM 10 million
120
AE -160 / HVS -14 MM 14 million
160
AE -240 / HVS -20 MM 20 million
240
AE -360 / HVS -30 MM 30 million
360
AE -480 / HVS -40 MM
40 million
480